There’s a gutter fastener for every job and every preference. Find the choice that meets your high standards for strength, ease of installation, and durability.
a. #8 x 1/2“ SCREWS
b. #10 x 1 1/2” SCREWS
c. POP RIVETS
d. TRU GRIP #9 X 1 1/2" SCREWS
Fasteners used to connect metal gutter pieces. Screws all have 1/4" hex heads.
8 x 1/2 Screws: Self-taping, double-zinc coated for no rust.
Requires a 1/4 inch nut driver for installation. Available in all colors.
10 x 1 1/2 Screws: Number-10 screw is largest, hanger-friendly screw available. Self-taping screw is made with deep head for stability with nut driver. Available in Mill Finish.
Pop Rivet: #42 rivet makes for a cleaner look than screws, but requires more time for installation.
Requires pre-drilling of 1/8 inch hole and tight fit for rivet to hold properly. Semi-permanent gutter element may require additional labor to remove for warranty work.
9 x 1 1/2 Screws: Number-9 screw, smaller diameter to avoid binding during installation of hidden hangers and allow for expansion/contraction. Tru Grip self-taping screw, deep head and specially coated for improved rust prevention.
8 x 1/2 inch (1000 pcs/carton, 100 pcs/bag)
10 x 1 1/2 inch (1000 or 4000 pcs/carton, 100 pcs/bag)
Pop Rivets #42 (1000 pcs/carton, 100 pcs/bag)
Pop Rivets #44 -WHITE only (1000 pcs/carton, 100 pcs/bag)
9 x 1 1/2 inch (1000 or 4000 pcs/carton, 100 pcs/bag)
b. MAZE SPIKES
Secure gutter to fascia board. Spikes are driven through gutter and into ferrules (inside the gutter) for added strength.
Ferrules: Made with .013 gauge aluminum, a mill finish, and inter-fin (90-degree bend) design for extra strength.
Maze Spikes: Barbed (not smooth) end, double hot-dipped galvanized, and bigger shank for ultimate holding power. Mill finish requires painting of spike heads. Recommended for use with heavy snow or ice and for long gutter runs when an expansion joint cannot be placed (virtually bend proof). Will not react with aluminum.
5 inch (500 pcs/carton)
6 inch (500 pcs/carton)
7 inch (50 lb/carton)
8 inch (50 lb/carton)
10 inch (50 lb/carton)
a. MASONRY NAILS
Masonry Nails are used to attach downspout straps to masonry.
Masonry Nails: Hardened flute design.
1 1/4 inch (5 lb or 50lb/carton)